CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Best of

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
temtronic



Joined: 01 Jul 2010
Posts: 9243
Location: Greensville,Ontario

View user's profile Send private message

Best of
PostPosted: Wed Apr 22, 2020 5:17 am     Reply with quote
It's nice to see the posts are growing !
ADC filtering was a 'must have'.
I can't understand how anyone could take just ONE reading, believe the result and do something using it. For the most part analog sensors are generally slow, say temperature, so you have LOTS of time to take several readings to confirm the reading is correct.
Even though I've gone from LM34 to DS18B20 for temperature sensing, I still take several readings, then average them. Not that I'm paranoid, but 'glitches' do occur... better safe than sorry.

Jay
Ttelmah



Joined: 11 Mar 2010
Posts: 19539

View user's profile Send private message

PostPosted: Wed Apr 22, 2020 11:36 pm     Reply with quote
Good. Hope you think the posts are worthwhile. As I already said, any
'suggestions' for other threads that should be added to this would be
appreciated. I'm busy doing one about TRIS, and pin/port I/O, and
the CCS I/O modes.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group