CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
PCW on Win11 with ICD-U80

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
OldGuy



Joined: 03 Feb 2013
Posts: 28
Location: Seattle Area

View user's profile Send private message

PCW on Win11 with ICD-U80
PostPosted: Mon Jan 12, 2026 5:38 pm     Reply with quote
I needed to change to a newer computer to accommodate Win 11.

For some reason, when using PCW, it will not attempt to program a part. It's like it doesn't know that the ICD-U80 exists. If I look at devices I see the it is listed. It also shows in ICD Load. The message I get from PCW is "Program target chip. The programming tool can be manually selected. Press F1 for more help." This is after pressing the button you normally use to program.

I have downloaded and installed the newest drivers from the CCS website.

Any help would be appreciated.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group