CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

work shop compiler vs PCWHD

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
raman00084@gmail.com



Joined: 28 Jul 2014
Posts: 38

View user's profile Send private message

work shop compiler vs PCWHD
PostPosted: Tue Jul 04, 2023 2:51 am     Reply with quote

In work shop compiler the limitation is 13 chips. Additional chips can be purchased by paying 20 dollars.

I have the following doubts

1. Is the IDE used in work shop compiler and PCWHD are same?
2. All features in PCWHD are available in work shop compiler?
3. Projects written in PCD compiler v5.045 will work in this work shop compiler ?
newguy



Joined: 24 Jun 2004
Posts: 1909

View user's profile Send private message

PostPosted: Tue Jul 04, 2023 8:38 am     Reply with quote

I don't have the CCS workshop compiler - I've been a customer (on & off) for about 20 years and I've almost always used the full compiler. When I was teaching, the students did use the student version of the compiler which was available at the time, and it was exactly same as the full compiler version. The only difference was that it was limited to 2 processors (at the time). Everything else was the same.

1. Very likely exactly the same. It wouldn't make financial sense for CCS to create & maintain two different IDE versions.
2. From the information that I've read about the workshop compiler, yes.
3. Yes they should. That said, 5.045 is very very old. Depending if the workshop compiler is a true processor-limited version of the newest compiler or if it was officially "forked" some time ago, there may be issues. I wouldn't anticipate any major problems.
temtronic



Joined: 01 Jul 2010
Posts: 9243
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Tue Jul 04, 2023 6:37 pm     Reply with quote

re: .....That said, 5.045 is very very old...

great now I DO feel ANCIENT..... I started with PCM V2.534....

thanks Crying or Very sad Crying or Very sad Crying or Very sad
Ttelmah



Joined: 11 Mar 2010
Posts: 19538

View user's profile Send private message

PostPosted: Tue Jul 04, 2023 11:39 pm     Reply with quote

Feel young!.
I started before CCS even existed....
newguy



Joined: 24 Jun 2004
Posts: 1909

View user's profile Send private message

PostPosted: Wed Jul 05, 2023 9:29 am     Reply with quote

Just checked, oldest version I have is 3.148 but I swear I first started with version 2.something.
temtronic



Joined: 01 Jul 2010
Posts: 9243
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Wed Jul 05, 2023 10:32 am     Reply with quote

Mine came with a spiral bound manual.......
Still have that 'somewhere'......
Plus 2 picstart plus programmers ( 1 free from Microchip...)
1/2 drawer full of 16c84s of course....and the UV 'eraser'.....
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group