 |
 |
| View previous topic :: View next topic |
| Author |
Message |
TimothyCarter
Joined: 08 Aug 2016
Posts: 22
|
| big variables to EEPROM |
 Posted: Thu Mar 31, 2022 9:51 am |
 |
|
Should anyone find this useful, here are some helper functions for reading/writing 16 & 32 bit variables to EEPROM.
Note: as stated in the comments, variables should be stored in sequential bytes of EE.
Download link: https://gitlab.com/smilingtexan/ccs-picc-eeprom-large-var.git
| Code: |
/*
* @file: eeprom_large.c
* @author: T. Carter
* @date: March 30, 2022
*
* This code is to provide methods to read and write 16-bit and 32-bit
* variables to the EEPROM of the PIC (it uses the built-in functions
* for read_eeprom and write_eeprom)
*
*/
#ifndef _STDINT
#include <stdint.h> // need this library from the CCS drivers folder
#endif
// The CCS built-in function read_eeprom will read and return one byte
// from the EEPROM memory. The following two functions are added
// to return a 16-bit and 32-bit unsigned int respectively.
// The macro __EEADDRESS__ is defined in the processor header file as
// either an 8-bit or 16-bit variable depending on EEPROM size.
// For the 16-bit and 32-bit methods of read & write; the addr variable
// should be the EEPROM address of the LSB (least-significant byte)
// Thus, the EEPROM addresses for the 16-bit and 32-bit variables
// should be sequential or things can get really confusing
uint16_t read_eeprom16 (__EEADDRESS__ addr)
{
uint8_t low, high;
low = read_eeprom(addr++); // read from eeprom at addr and then increment addr
high = read_eeprom(addr);
return(make16(high, low));
}
uint32_t read_eeprom32 (__EEADDRESS__ addr)
{
uint8_t low, high;
uint16_t wLow, wHigh;
low = read_eeprom(addr++); // read from eeprom at addr and then increment addr
high = read_eeprom(addr++);
wLow = make16(high, low);
low = read_eeprom(addr++);
high = read_eeprom(addr);
wHigh = make16(high, low);
return(make32(wHigh, wLow));
}
// The following eeprom_write function only writes the data to EEPROM if
// it is different from what is at that addr
void eeprom_write (__EEADDRESS__ addr, uint8_t data)
{
uint8_t temp = read_eeprom(addr);
if (data != temp)
{
write_eeprom(addr, data);
}
}
// The following two functions are provided to write 16-bit and 32-bit
// variables to the EEPROM; similar to the read_eeprom functions above
void write_eeprom16 (__EEADDRESS__ addr, uint16_t data)
{
uint8_t smallData = make8(data, 0);
eeprom_write(addr++, smallData);
smallData = make8(data, 1);
eeprom_write(addr, smallData);
}
void write_eeprom32 (__EEADDRESS__ addr, uint32_t data)
{
uint8_t smallData = make8(data, 0);
eeprom_write(addr++, smallData);
smallData = make8(data, 1);
eeprom_write(addr++, smallData);
smallData = make8(data, 2);
eeprom_write(addr++, smallData);
smallData = make8(data, 3);
eeprom_write(addr, smallData);
}
|
_________________
“Computer science education cannot make anybody an expert programmer any more than studying brushes and pigment can make somebody an expert painter.”
- Eric S. Raymond |
|
 |
Ttelmah
Joined: 11 Mar 2010
Posts: 19539
|
|
| Posted: Mon Apr 04, 2022 6:30 am |
|
|
Just FYI, the compiler already has code to do this (and for several more
types as well). Look at 'internal_eeprom.c', which has routines to handle
int1, int16, int32, float, and for PCD, float48, float64 etc.. |
|
|
TimothyCarter
Joined: 08 Aug 2016
Posts: 22
|
| I figured CCS had something ... |
| Posted: Tue Apr 12, 2022 3:20 pm |
|
|
| Ttelmah wrote: | Just FYI, the compiler already has code to do this (and for several more
types as well). Look at 'internal_eeprom.c', which has routines to handle
int1, int16, int32, float, and for PCD, float48, float64 etc.. |
I figured they must have had something, but could not find it at the time I wrote this. (Originally written a couple of years ago.)
_________________
“Computer science education cannot make anybody an expert programmer any more than studying brushes and pigment can make somebody an expert painter.”
- Eric S. Raymond |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19539
|
|
| Posted: Mon Apr 25, 2022 1:14 am |
|
|
I think perhaps they need to do something like the 'readme', with a list
of the driver files and what they do.
The file goes back to 2012, so should have been with your compiler
'a couple of years ago'.  |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
