CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Problems debugging PIC18F8490: Invalid clock from the debugg

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
Guest
Problems debugging PIC18F8490: Invalid clock from the debugg
PostPosted: Wed Sep 21, 2005 4:26 am     Reply with quote
Hi!

I get this message when trying to debug PIC18F8490. I've worked with many kind of PICS and the debugger ICD-U40 works perfect except in this case :(

(Also in this case, but the problem is diferent -> http://www.ccsinfo.com/forum/viewtopic.php?t=24475)

I've PCWH compiler, PCH version 3.219 PCM/PCB 3.222 and ICD firm version 1.39

thanks in advance
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group