
1. Unzip the ARM-ICD.zip file into a temporary directory.

2. Right click on the  FTDIBUS.inf file and select INSTALL.
   If there is an error go to step 5.
   Right click on the  ARM-ICD.inf file and select INSTALL.
   If there is an error go to step 5.

   Note the default Windows setting is not to show some file extensions.

3. Open the device manager and expand the PORTS section.
   If the device programmer appears with no yellow error flag
   then note the COM port number and go to step 5.

4. Double click on the device programmer entry.  If it is not under
   PORTS check OTHER DEVICES and UNKNOWN DEVICES or USB.

   Click on the DRIVERS tab and do an install.

   Tell it you want to browse your computer and point it to the 
   temporary directory.

   Go to step 3.

5. Right click on the CCSLOAD desktop icon and select PROPERTIES.

   On the target line after the final " add a space followed by:
        PORT=COMx
   Where x is the COM port number from step 3.

   OK to that.

6. Double click on the CCSLOAD desktop icon and all should be good.

